Click here to see all Rough GemstonesClick here to see all Facet Grade GemstonesClick here to see all Faceted GemstonesClick here to see all Handmade Jewelry 100% real not man made but genuine from the earth gemstone.
100% Genuine and natural no treatment.
100% money back if not happy.
The gemstones in this ad are the gemstones you will receive
This is not a stock photo
Corundum (aluminum oxide)
Padparadshah – Strong yellow, orange-pink to hot pink.
Ruby – Red to dark pink. Usually has a hint of violet.
Sapphire – Natural corundum is commonly thought of as dark blue, but it occurs in many other colors such as yellow, green, pink, colorless and purple.
Mohs hardness 9
Refractive index 1.766-1.774
Critical angle 34.5°
Specific gravity 3.99-4.0
Fracture Uneven, conchoidal, splintery.
Dispersion .Moderately high (018)
Heat sensitivity None
Pleochroism Dichroic. Darker colors usually show stronger dichroism. Natural blue distinct (dark blue to greenish-blue); Natural green weak (more or less yellow); Natural orange strong (orange to yellow-brown or colorless); Natural purple distinct (purple to pinkish); Natural ruby strong (deep red to yellowish-red); Natural yellow weak (yellow to light-yellow).
Birefringence (double refraction) Weak (.018)
Crystal structure Hexagonal (trigonal), dipyramidal
Cutting Corundum cuts and polishes at varying rates on different facets. Dont cut with a bonded lap at any finer grit than 600, otherwise an orange peel effect will make polishing a nightmare. Pre-polish with 8,000 grit on ceramic, zinc or copper lap helps speed up final polishing immensely.
Polishing Ceramic with 100,000 or 200,000 diamond spray, or zinc lap with 50,000 or 100,000 diamond. BATT can be used as a polish lap, but is a little soft for corundum.
Comments Orient for best color and yield. Corundum cuts and polishes differently on different facets.
SOLD out of stock Burma Ruby set 7.5mm 2.2ct and 2.1 ct 4.5 tcw s949 there are 2 stones in this lot diamond...